Postcode restrictions apply.
More information
Cramer Ceramic, Enamel & Acrylic Repair Spray - 50ml Alpine White
For covering repairs & unsightly marks on Acrylic, Enamel, Ceramic, Fibreglass and Resin Stone surfaces.
For professional and cost-saving repairs when ease and perfect results are important.
Each Cramer Repair Spray can be used to cover repairs on:
If you require a colour not shown have a look at the Cramer Colour Card under downloads to see available colours. Colours can be ordered on request.
DELIVERY RESTRICTIONS & SURCHARGE
We cannot ship this item to Highlands & Islands or International addresses.
The item contains an Aerosol which is prohibited by Royal Mail, most standard Couriers & Air Mail services.
We can only deliver to UK mainland addresses via specialist carrier, therefore a £3.50 additional delivery surcharge will be applied at checkout.
Easy to use to cover repairs & unsightly marks.
Tip:
Even coverage is easier to achieve if you use a mask cut from paper, just cut to size of area being sprayed. For larger areas mask surrounding area.
Hold the mask about 1 - 2 cm in front of the damaged area and start spraying onto the mask, before directing the spray with light movements over the cut out area.
Wait one minute and apply the next coat. Repeat this process until the damaged area has been completely covered. To remove drips or runs you can use Acetone ( follow manufactures instructions )
The repaired area can be polished with either Email Star or Acryl star polish after four days.
Hi can you use your bath after the two hours of spray
This product had good coverage but is cream not white. It was also supplied with no instructions so I had no idea how long it would take to dry. It cannot stand any water on it while drying so we were left with lines on the porcelain where water dripped from the cistern.