CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

Cramer Acryl-Star Polish 100ml

Sensitive cleaning and care of Acrylic, Polyester & Fibreglass

LID: 83
cramer
100ml
acid free
pleasant scent
0445
0445
Discontinued

Combined cleaning and polishing paste for acrylic, polyester and fibreglass surfaces - Acid free, Eco-Friendly! 
Suitable for removing light scratches on bathtubs, washbasins, sinks, shower trays etc.

Acryl-Star has been especially formulated to be completely compatible with acrylic surfaces.The Acryl-Star cleaner and polishing paste removes lime deposits, discolouration and heavy soiling by the use of a special polishing powder. Existing scratches can also be removed. The application does not develop an unpleasant or noxious smell. For use on acrylic, polyester and fibreglass surfaces.

Until now, two different products were needed for the daily cleaning and maintenance of acrylic surfaces and for removing scratches and wear and tear.
Acryl-Star cleaning and polishing compounds advanced composition satisfies both demands.

Cleaning and care:
The Cramer Acryl-Star removes lime, discolouration and tough deposits without scratching.
The cleaning technique is based on a combination of the right detergent with a special polishing compound.
Existing minor scratches are removed.

Scratches and wear and tear:
Use undiluted with a soft cloth to achieve a high gloss finish.

 

Downloads & Articles
More Info

Instructions for daily, sensitive cleaning:
Apply the paste with a soft moist cloth or sponge, rub in and then rinse off with warm water.

Polishing/Pre-treatment
Light scratches can be removed with the Acryl-Star only, deeper scratches must be sanded, with the sandpaper included, before polishing.  First use the 800 Grade ( the more abrasive one) wet/dry sandpaper, in a straight direction not in circles, with water.  After removing the existing scratches, clean the area.  Now use the 1200 Grade wet/dry sandpaper with water, for this sanding change direction about 90degrees and sand the area well to give a smooth matt surface.  For perfect results it is important to do this accurately.

Polishing
Apply the paste on a soft cotton cloth and polish the area under light pressure in circular direction to give the perfect finish.

 

Customer Reviews

Delighted to have found this product. We have a white plastic bath that over the years the shower hose had left scratch marks. I was not able to removed the marks. This product removed the marks immediately leave what now looks like a brand new bath. Still looks good after a month.

REVIEWED BY: GGM
star
star
star
star
star

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE